TiLite Rigid TR Series - CHAPTER 7: BACK UPHOLSTERY, SEAT UPHOLSTERY AND SEAT CUSHIONS; Velcro Adjustable Back Upholstery (TR Series, YG Series, YR Series, ZR Series, Aero Z and Evo)

TiLite
®
OM000007 - Rev. B
48
halves of the side guard clamp. See Figure 53.
2. Remove the fold-down side guard clamp assembly.
Reinstalling Fold-Down Rigid Side Guard
Assembly
Tools Needed:
• 3/8” Allen Wrench
1. Align the two halves of the side guard clamp around
the seat tube of the frame. See Figure 53. Note:
The half of the clamp with the side guard hinge
attaches on the outside of the frame.
2. Insert the two Allen Screws through the washers
and the two halves of the clamp and securely
tighten.