TiLite Rigid TR Series - Amputee Adapters (TR Series and YR Series)

TiLite
®
OM000007 - Rev. B
70
Amputee Adapters
(TR Series and YR Series)
Amputee adapters serve to relocate the camber tube
behind the rear of the wheelchair. By positioning the
camber tube behind the rear of the chair, the center of
gravity is shifted rearward and the stability of the chair
is increased. Figures 88 through 90 show the
configuration of the TR and YR Series wheelchairs
when amputee adapters are used.
Figure 88
Amputee Axle Plates
Figure 89
TR/YR Amputee Adapter
Figure 90
TRA/YRA Amputee Adapter
Amputee Axle Plate TR, YR
Amputee Axle Plate TRA, YRA
Amputee Axle Plate TR/YR
Amputee Axle Plate TR/YR