Tinius Olsen MP1200 User Manual

MP1200 & MP1200M
Extrusion Plastometer
(Melt Indexer)
MP1200M shown
SYSTEM INSTALLATION AND OPERATION MANUAL.
Part #: 02002100 (MP1200) & 02002101(MP1200M)
Revision 2c Date: 8 August 2013
This document contains confidential and proprietary information of Tinius Olsen
Testing Machine Company. In consideration of the receipt of this document, the
recipient agrees not to reproduce, copy, use or transmit this document and/or the
information therein contained, in whole or in part, or to permit such action by others,
for any purpose, except with prior written permission of Tinius Olsen Testing Machine
Company. All rights reserved.
___________________________________________________________________
TINIUS OLSEN TESTING MACHINE COMPANY
1065 Easton Road
Horsham, Pennsylvania 19044-8009 USA
www.TiniusOlsen.com

Tinius Olsen MP1200 Specifications

General

Brand	Tinius Olsen
Model	MP1200
Category	Measuring Instruments
Language	English

Summary

Section 1 – Introduction

1.1 Overview

General introduction to the MP1200/MP1200M Extrusion Plastometer and its capabilities.

1.11 Electrical Requirements

Details on power supply, voltage, current, and fuse requirements for the machine.

Section 2 - Model MP1200 Digital Controller/Timer

2.2 MP1200 Controller/Timer

Detailed description of the controller's hardware and interface components like display and keys.

2.3 Three-Zone Temperature Control

Explanation of the PID temperature control system for precise zone management.

Section 4 – Available Options & Accessories

4.1 Weights

Table detailing weights for different ASTM D 1238 and ISO 1133 test conditions.

4.4 PPDT Automatic Timing Switch (P/N 02001505)

Requirement for Procedure B tests and its function in monitoring piston position.

4.8 Weight Support, Lowering and Lifting Device with Swing–Away Weight Support Platform (WLD)

Accessory for raising/lowering test weights, included with MP1200M.

Section 5 – Set-Up and Installation

5.3 Leveling the Machine

Procedure for ensuring the machine is perfectly level for accurate testing.

5.4 Connections

Information on connecting USB and other ports on the machine.

Section 7 – MP1200M Motorized Weight Support and Lowering/Raising Device with Swing-Away Feature (WLD)

7.3 DC MOTOR CALIBRATION

Procedures for calibrating the WLD's DC motor and its parameters.

7.4 Zeroing the Encoder on the WLD (Synchronize with PPDT)

Steps to synchronize the WLD encoder with the PPDT for accurate height readings.

Section 11 – Configuration Mode

11.1 Machine Settings

Configuring machine name, temperature limits, and enabling accessories like PPDT and WLD.

11.3 Calibrate

Procedures for calibrating the machine's components, including RTD and PPDT.

Section 13 – Testing Polymers According to ASTM D 1238 “Procedure A” (Manual Cut-Off Operation)

13.2 Creating a New Procedure A Program

Setting up a new test program for Procedure A.

13.3 Test Procedure

Step-by-step guide for conducting a melt index test using Procedure A.

Section 14 - Testing Polymers According to ASTM D 1238 Procedure B (Automatically Timed Flow Rate) when the Melt Density is known

14.2 Creating a New Procedure B Program

Configuring test parameters for Procedure B.

14.3 Test Procedure

Detailed steps for executing a Procedure B test.

Section 17 – Preventative Maintenance

17.1 Cleanliness

Importance of cleaning for maintaining machine accuracy.

17.3 Electrical Checks

Procedures for checking electrical components like heaters and probes.

Section 18 – Calibration/Verification – PPDT Attachment

18.1 Calibration/Verification Procedure for PPDT

Detailed steps for calibrating the PPDT's measuring capabilities.

18.2 Temperature Verification/Calibration

Procedures for verifying and calibrating the machine's temperature readings.