current talking. During the conversation, User can alternate between Headset, Handset and
Handfree by pressing the corresponding keys.
Note: The
will flash during the Incoming interface
3.3.Mute
You can press the Mute key to make the user NOT be heard by the other party, but User
can hear the other party. and
icon will be shown on the LCD, and press the Mute key
again to recover.
3.4.Call Hold/Resume
1. Press the Hold button or Hold softkey to put User active call on hold.
2. If there is only one call on hold, press the hold softkey to retrieve the call.
3. If there are more than one call on hold, press the line button, and the Up/Down button to
highlight the call, and then press the Resume button to retrieve the call.
3.5.Do Not Disturbed (DND)
If you enable DND mode, the phone will reject to answer all calls automatically and play busy
tone, the UI will present missed calls at the same time.
3.6.Call Waiting
To configure Call Forward via Phone interface:
1. Press Menu -->Features-->Call Waiting-->E nter, ;
2. Use the Left or Right key to activate or deactivate call waiting.
3. Then press the Save key to save the changes.