TIPTEL 3240 - 3.20. Busy Lamp Field (BLF)

and you can choose to lock the function keys or all keys. And this function can only be
configured through the web UI, please refer to the web interface for the details.
 Function Keys: The function keys are locked. You cannot use the LIINE KEYS, MESSAGE
KEY, SOFT KEYS, NAVIGATION KEYS, FUNCTION KEYS until unlocked.
 All Keys: All keys are locked.
3.20.Busy Lamp Field (BLF)
Busy Lamp Field (BLF) is used to monitor a specific user for status changes on IP phones. For
example, you can configure a BLF key on a supervisor’s phone to monitor the phone user
status (busy or idle). When the monitored user places a call, a busy indicator on the
supervisor’s phone indicates that the user’s phone is in use.
BLF LED Mode
BLF LED Mode provides two kinds of definition for the BLF key LED status.
Line key LED
LED Status
Description
Solid green
The monitored user is idle.
Fast flashing green
The monitored user receives an incoming
call.
Slow flashing green
The monitored user is dialing.
The monitored user is talking.
Off
The monitored user does not exist.
DSS Key LED (DSS keys only for Tiptel3240)
LED Status
Description
Solid green
The monitored user is idle.
Slow flashing red
The monitored user receives an incoming
call.
Solid red
The monitored user is dialing.
The monitored user is talking.
Off
The monitored user does not exist.