User=phone: If enabled, IP phone will send user=phone
within SIP message.
PTime: Interval time between two consecutive RTP
Anonymous Call: If enabled, all outgoing call for the
designated account will be anonymous number.
Anonymous Call Rejection:
out call for the designated account will be
rejected.
Is escape non Ascii character: To transfer the symbol to
Missed Call Log: To display the miss call log.
To display or configure third-party MOH (music-on-ho ld )
server.
Active: To enable or disable this MOH server, If enabled,
the IP phone will play MOH from configured server.
Music Server Address: To configure MOH server address.
To display or configure session timer settings.
Active: To enable or disable this feature, If enable, the
ongoing call will be disconnected automatically once the
session expired unless it’s been refreshed by UAC or UAS.
Session Expire: Configure session expire time.
Session Refresher: To config
ure who should be response
for refreshing a session.
Note
: UAC means User Agent Client, here stands for IP phone.
UAS means User Agent Server, here stands for SIP server.
To display or configure BLF List URI address.
BLF List URI: BLF List is short for Busy Lamp Field List.
BLFList PickUp Code: To set the BLF pick up code.
BLFList BargeIn Code : To set the BLF barge in code.
To display or configure Broadsoft AOC feature.
AOC: A feature used to be accounting on Broadsoft
platfo r m.
: Please consult your administrator further information.
To enable or disabled SRTP feature.
Voice Encryption(SRTP): If enabled, all audio signal
(technically speaking it’s RTP streams) will be encrypted
for more security.
To display NAT-related settings.
UDP Keep Alive message: If enabled, IP phone will send
alive message periodically to router to keep
UDP Alive Msg Interval: Keepalive message interval.
Rport: Remote Port, if enabled, it will add Remote Port
To Next Page
Loading...
