TIPTEL 3240 - Page 57

Sections
Description
Forward Transfer
To display and configure Forward setting.
Note
: There are three types of forward: Always Forward, Busy
Forward and No answer Forward.
 Always Forwar
d: Any incoming call will be forwarded in
any situation.

Busy Forward: An incoming call will be forwarded if IP
phone is busy.

No answer Forward: An incoming call will be forwarded
if it’s no answer after a specific time.
Call Waiting
To e n a b le o r di s a ble Call Waiting.

Call Waiting Enable: If enabled, it allows IP phones to
receive a new incoming call when there is already an
active call.

Call Waiting Tone: If enabled, it allows IP phones to play
the call waiting tone to the waiting callee.
Auto Redial
Auto redial allows IP phones to redial an unsuccessful call for
designated times within designated interval.
 Auto Redial: To enable or disable auto redial feature.

Auto Redial Interval: Determine the interval between
two consecutive attempts.

Auto Redial Times: Determine how many times to redial.
DND

DND (Do Not Disturb) allows IP phones to ignore any
incoming calls.

Return Code when DND: Determine what response code
should be sent back to server when there is an incoming
call if DND on.
 DND On Code: The Code used to turn on DND on server’s
side, if configured, IP phone will send a SIP message to
server to turn on DND on server side if you press DND
when DND is off.

DND Off Code: The Code used to turn off DND on server’s
side, if configured, IP phone will send a SIP message to
server to turn off DND on server side if you press DND
when DND is on.
Call PickUp 
Visual BLF PickUp Alert: To enable the BLF pick up
function.
Call Park
Call park allows users to park a call to a special extension and
then retrieve it via any other phone within the same system.
 Active: To enable or disable call park feature.
 Account: To determine which account to take effect.

Target: To configure a designated target extension.
Note: Please consult with your telephony system