TROUBLESHOOTING
Error conditions are listed in alphabetical order.
Use the table below to quickly determine if this section addresses
your particular instrument problem.
Cryo Module Page
Alarm sounds................................... 6.2
Cooling plate does not function............... 6.2
Cooling plate does not reach
set temperature .............................. 6.2
Power indicator will not illuminate........... 6.2
Embedding Module Page
Alarm sounds and error message is
displayed..................................... 6.3
Paraffin will not dispense correctly........... 6.4
Power indicator/other indicators will
not illuminate................................ 6.4
In the event this section cannot assist you in solving your
instrument problem, call:
1-800-725-8723
(U.S. Customers, only)
If located outside the U.S., contact your nearest Tissue-Tek
®
instrument distributor or representative.
Section 6
To Next Page
Loading...