Need help?Do you have a question about the Tissue-Tek TEC 5100 and is the answer not in the manual?
General| Model | TEC 5100 |
|---|---|
| Type | Embedding Center |
| Frequency | 50/60 Hz |
| Temperature Uniformity | ±1°C |
| Dimensions | 60 cm |
| Working Surface Temperature Range | Ambient to 70°C |
| Voltage | 220-240V |
Explains the warm-up periods and ready states for the Embedding and Cryo modules.
Describes the LCD display and operational keys of the control panel.
Provides step-by-step instructions for installing the Tissue-Tek TEC 5 system.
Steps to confirm proper installation and initial system operation.
Instructions for modifying and viewing temperature settings for various modules.
Detailed steps for adding clean molten paraffin to the Embedding Module.
Allows setting specific ON and OFF times for selected days of the week.
Step-by-step guide for programming the automatic timer for system operation.
A detailed example procedure for embedding tissue specimens.
Lists common error conditions for the Cryo Module and their page references.
Lists common error conditions for the Embedding Module and their page references.
Details specific causes and solutions for Cryo Module errors.
Details specific causes and solutions for Embedding Module errors.
Addresses issues like paraffin dispensing, power indicators, and LCD display errors.
To Next Page
