25
These buttons are no use.
1.4 Getting Started
Install the digital TV receiver properly, referring to Installation on page 14.
Plug the power adapter into a power outlet, and insert the connector into the
power socket on the rear of the receiver. Then press the power button on the
remote control to turn on the receiver.
When turning on the receiver for the first time, the initial setup process automat-
ically starts. Follow the on-screen instructions to finish the process. At each step,
either make a choice or skip the step.
1. Choose a language for the user interface.
2. Configure the network settings. See Network Connection on page 17 and
Network Settings on page 54.
3. Install add-ons to internet-based apps, such as Free TV+ and iRadio+, when
an internet connection is available. Additionally, determine whether to re-
store the receiver using the stored settings and channels, if there is any
backup data.
4. Set the clock. See Clock Settings on page 55.
5. Scan for TV channels. See Scanning for Channels on page 20.
I 11
To Next Page
Loading...
