changes the skip interval from 10 seconds to 10 minutes.
Jump to the beginning of the time-shift recording: Press the previous button
.
Return to the live programme: Press the stop button .
5.3 Playing Recordings
Press the playlist button to access the recordings stored on removable stor-
age devices. For details, see Playing Recordings and Videos on page 42.
Note
TV recordings cannot be played by any receiver other than the receiver that
made them.
5.4 Recording Preferences
Open the Settings > Conguration > Recording Option menu.
• Alarm Conrm Message: With this enabled, a message appears to notify
users that a scheduled recording event will begin in 5 minutes.
• Recording Stop Message: With this disabled, pressing the stop button
stops the current recording immediately without asking for confirmation.
• Extra Recording Time Before Start: It may be good to begin recording a few
minutes earlier than the scheduled start time to avoid missing the beginning
of a programme. Specify how much earlier the receiver should begin record-
ing.
• Extra Recording Time After Finish: It may be good to finish recording a few
minutes later than the scheduled end time to avoid missing the end of a pro-
gramme. Specify how much later the receiver should finish recording.
• TimeShift Start: With this set to Auto, the receiver begins time-shift record-
ing whenever changing channels. With this set to Manual, pressing the pause
38 R TV
To Next Page
Loading...
