Tiviar mini - System Recovery; Maintaining the Digital TV Receiver

Open the Settings > Conguration menu, choose Parental Control menu, and
then enter the passcode.
• Censorship: Specify a programme rating.
• Change PIN code: Change the passcode. The default is “0000”.
• System: With this set to Lock, the passcode is required when turning on the
receiver.
• Installation: With this set to Lock, the passcode is required when accessing
the Installation menu.
• Conguration: With this set to Lock, the passcode is required when access-
ing the Conguraton menu.
• Edit Services: With this selected, the passcode is required when accessing
the CH Edit app.
• T Apps: With this set to Lock, the passcode is required when accessing the T
Apps app.
• Play List: With this set to Lock, the passcode is required when pressing the
playlist button to access a removable storage device.
8.7 Maintaining the Digital TV Receiver
The internal flash memory is used for maintaining the preference settings and
channel data.
Open the Settings > Installation > System Recovery menu. Use these to reset
the digital TV receiver.
• System restore to factory default: Reset all settings to factory defaults and
clear all channels.
• Reset conguration data: Reset all settings to factory defaults.
• Reset service data: Clear all channels.
Use these to back up and restore the receiver.
• System restore to stored position: Restore the receiver using the stored
settings and channels.
• Store system data: Back up all settings and channels.
P S 57