Tiviar mini - Scanning a SpecifiC Transponder; Scanning for One Channel

transponders using every possible combination of transponder elements not
to miss any channel in a scan. However, it takes much longer time.
• Set Search Mode to Fast Scan. Particular satellite TV service providers man-
age dedicated transponders to provide up-to-date transponder information.
With this method, the receiver uses that sort of transponder for faster and
more precise scanning. Choose Select Operator and select a satellite TV ser-
vice provider.
• Set Search Mode to Canal Digital Nordic. With this method, the receiver
scans only for Canal Digital channels.
Make sure that the common options are properly configured before selecting
Start Search to start a channel scan.
Scanning a Specic Transponder
Generally, one transponder carries multiple TV channels. To scan a specific
transponder for the channels it carries, set Search Mode to Manual. Users need
to get several details about a target transponder.
• Frequency: Choose a target transponder from the list of transponders.
• Symbol rate: Specify the transponder’s symbol rate.
• Polarity: Specify the transponder’s polarization.
Make sure that the common options are properly configured before selecting
Start Search to start a channel scan.
Scanning for One Channel
To scan for only one specific channel, set Search Mode to Advanced. Each satel-
lite TV channel has unique packet IDs used to distinguish between channels.
In addition to the information about a target transponder, users need to know
what packet IDs a target channel uses.
• Video PID: Specify the channel’s video packet ID.
• Audio PID: Specify the channel’s audio packet ID.
S  C 25