Tiviar mini - Audio and Video Settings

8.3 Clock Settings
Open the Settings > Conguration > Time Setting menu.
• Local Offset: Specify the time zone where the receiver is located.
• Daylight Saving: To apply daylight saving time, specify the country where
the receiver is located.
• Clock Mode: Determine which to use between 12-hour and 24-hour clock
formats.
For Wake Up Mode and Sleep Mode, see Setting Up Timers on page 32.
8.4 Audio and Video Settings
Open the Settings > Conguration > A/V Output Setting menu.
• TV Type: Determine which TV standard to use.
• TV Aspect Ratio: Determine which aspect ratio to use by default.
• Display Resolution: Determine which resolution to use by default. Tech-
nically, 1080p is better than 1080i, but the difference is only slight to most
people.
• Display Format: Determine how to display 4:3 pictures on the 16:9 screen,
or vice versa.
• Pillar Box: 4:3 pictures fit the height of the 16:9 screen with black bars
on the sides.
• Full: 4:3 pictures blow up to fit the width of the 16:9 screen with the top
and bottom edges cut off.
• Pan Scan: 16:9 pictures blow up to fit the height of the 4:3 screen with
the sides cut off.
• HDMI Dolby Digital: Determine whether or not to pass through Dolby au-
dio via HDMI when available.
• Dolby Digital Default: Determine whether or not to use Dolby audio when
available.
P S 55