Toa VM-3240VA - Page 27

To Next Page

To Previous Page

Step 3.

Make announcement while pressing the emergency microphone’s Talk key.

During emergency microphone announcements, the Emergency

Microphone Operation indicator and Output indicator both light red.

At the same time, the "EMERGENCY VA MICROPHONE" indication

is displayed on the LCD.

Talk key

ENCY

ICR

Main Page

Table of Contents2
General Description5
Features5
System Configuration8
Nomenclature and Functions10
VM-3240VA Voice Alarm System Amplifier10
VM-3240E VM Extension Amplifier10
RM-200M Remote Microphone16
Making General Broadcasts18
Making Broadcasts from the VM-3240VA18
BGM Broadcasts18
Microphone Announcements19
Broadcasting from the RM-200M21
Microphone Announcements21
Automatic Announcement Broadcasts22
Making Automatic Announcements Using Control Signal Inputs23
Summary of General Broadcast Procedures24
Making General Broadcast from the VM-3240VA24
Making General Broadcasts from the RM-200M Remote Microphone24
Broadcasting Automatic General Announcements Using the Control Signal Input24
Making Emergency Broadcasts25
Making Emergency Broadcasts from the VM-3240VA26
Microphone Announcements26
Automatic Emergency Announcement Broadcasts28
Summary of Emergency Broadcast Procedures30
Priority Settings31
General Broadcast Priorities31
Emergency Broadcast Priorities32
Cpu off Function32
What Is the CPU off Function32
Making All-Zone Calls Using the CPU off Function32
Surveillance33
What Is the Surveillance Function33
How to Use the Surveillance Function33
Monitored VM-3000 System Components33
Equipment Operation Upon Failure Detection and Recovery Procedure34
Equipment Operation Upon Failure Detection35
Failure Acknowledgment36
Failure Reset Operation37
Examples38
Failure Example 1: Communications Failure38
Failure Example 2: Short Circuit of Speaker Line39
LCD Failure Messages41
Settings44
Keys Used for Settings44
Setting Hierarchical Chart45
Configuration Settings46
Configuration Settings Hierarchical Chart46
Password Entry47
Configuration Setting Items48
Information Settings58
Information Setting Hierarchical Chart58
Information Setting Items58
Audio Settings60
Audio Settings Hierarchical Chart60
Audio Setting Items61
Surveillance Settings65
Surveillance Setting Hierarchical Chart65
Surveillance Setting Items65
Inputs 1 - 3 Settings66
Inputs 1 - 3 Setting Hierarchical Chart66
Inputs 1 - 3 Setting Items67
BGM Settings68
BGM Setting Hierarchical Chart68
BGM Setting Items69
Rm-200M Remote Microphone Settings70
DIP Switch Functions70
Unit ID Number Settings (Switches 1 and 2 Operation)70
Talk Key Settings (Switch 4 Operation)70
Compression Settings (Switch 6 Operation)70
Installation71
Installing the RM-200M on a Wall71
Creating Remote Microphone Name Labels72
Inserting the Name Label72
If the Name Label Is Not Printed Correctly73
Dimensional Diagram for Printing Devices73
Pattern Paper for Hand Writing74
Rack Mounting76
Connections77
Removable Terminal Plug Connection77
Audio and Control Connection Example78
RM-200M Remote Microphone Connections80
Power Supply from VM-3240VA or VM-3240E80
Link Connection to VM-3240VA80
General Control Input Terminal Connections81
Controlling Functions Assigned to the General Control Input Terminals from the External Equipment81
Using the Local Input82
Example of Connection to External Equipment83
Emergency Control Input Terminal Connections84
External Emergency Control Equipment Connection85
Connections to Detect Failures on the Emergency Control Input Lines86
Status Output Terminal Connections88
Power Amplifier and Speaker Connections95
Connections between VM Amplifiers96
Connecting Power Supply Equipment97
VM-3000 Cable Usage Table99
Specifications101
VM-3240VA Voice Alarm System Amplifier101
VM-3240E VM Extension Amplifier103
RM-200M Remote Microphone104

Toa VM-3240VA - Page 27

Table of Contents

Related product manuals