2
Control and Feature Identification Codes
Note that the types of the outboard motor differ according to the countries where they
are sold.
BFT150D is provided with the following types according to the shaft length and the rotating
direction of the propeller shaft.
Model BFT150D
Type LRU XRU XRZ XCRU
Transom Height 508 mm (20.0 in)
(Shaft Length) 635 mm (25.0 in)
Standard Rotating Propeller Shaft
Counter-rotating Propeller Shaft
Power Trim/Tilt
TYPE CODE
Example
XC R
Destination
U: Europe, Z: Australia
Rotating direction of propeller shaft
C: Counter-rotating propeller shaft is equipped.
None: Standard rotating propeller shaft is equipped.
Transom Height
L: 508 mm (20.0 in), X: 635 mm (25.0 in)
Remote Control
R: Mechanical wire
U
How To Determine Which
Direction The Propeller Shaft
Rotates
The direction the propeller shaft
rotates can be determined based on
whether or not the shaft has a groove.
With groove: Counter-rotating
Without groove: Standard rotating
WITHOUT
GROOVE
WITH
GROOVE
GROOVE
36ZVTT00_EN.book 2 ページ ２０２１年１１月１９日 金曜日 午後３時２１分
To Next Page
Loading...
