TOHATSU BFT 150D - Power Tilt Switch (Outboard Motor Pan)

70
OPERATION
When the boat is mounted with the
two outboard motors, tilt up the right
and left outboard motors one by one
using the switch. Set the tilt lock
lever of one outboard motor at the
LOCK position, then tilt up another
outboard motor.
After tilting down the outboard
motors, adjust the trim angle of the
right and left outboard motors using
the switch.
Power Tilt Switch
(outboard motor pan)
When you are away from the power
trim/tilt switch on the control lever
side, you can operate the power tilt
switch on the outboard motor side.
The switch operation is the same as
that of the power trim/tilt switch on
the remote control lever side.
(R3 type) (DUAL TYPE)
(LEFT)
POWER TRIM/TILT SWITCH
(RIGHT)
CAUTION
Do not operate this power tilt
switch on the outboard motor
while sailing.
POWER TILT SWITCH
36ZVTT00_EN.book 70 ページ ２０２１年１１月１９日 金曜日 午後３時２１分