95
MAINTENANCE
Lubrication
Wipe the outside of the engine with a
cloth dipped in clean oil. Apply
marine anticorrosion grease to the
following parts:
Lubrication interval:
20 hours or a month after the date of
purchase for initial lubrication, then
every 100 hours or 6 months.
• Apply anticorrosion oil to pivot
surfaces where grease cannot
penetrate.
• Lubricate more frequently when
used in salt water.
PROPELLER SHAFT
THROTTLE LINK/
PIVOT/PLATE
ENGINE COVER
LOCK PLATE
Apply grease to the back
of the engine cover lock
plate as well.
SWIVEL CASE
TILT SHAFT
TILT BRACKET
THROTTLE ROD/LINK
PTT THRUST
RECEIVER
36ZVTT00_EN.book 95 ページ ２０２１年１１月１９日 金曜日 午後３時２１分
To Next Page
Loading...
