EasyManua.ls Logo

TOHATSU BFT 150D - Transporting; Fuel Line Disconnection

TOHATSU BFT 150D
130 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
82
10. TRANSPORTING
Fuel Line Disconnection
Before transporting the outboard
motor, disconnect and remove the
fuel line.
Transporting
When transporting the outboard
motor on a vehicle, perform the
following.
1. Remove the engine cover (see page
41).
2. Set the hoist hooks against the
engine hangers and hang the
outboard motor to remove it from
the boat.
WARNING
Gasoline is extremely flammable,
and gasoline vapor can explode,
causing serious injury or death.
• Be careful not to spill fuel.
Spilled fuel or fuel vapor may
ignite. If any fuel is spilled,
make sure the area is dry
before storing or transporting
the outboard motor.
• Do not smoke or allow flames
or sparks where fuel is drained
or stored.
ENGINE HANGERS
HOIST
HOOKS
36ZVTT00_EN.book 82 ページ 2021年11月19日 金曜日 午後3時21分

Table of Contents