TOHATSU BFT 150D - R3 Type

61
OPERATION
Move the remote control lever(s)
approximately 35° toward the
FORWARD or REVERSE position to
engage the desired gear.
When the boat is mounted with the
two outboard motors, hold the remote
control lever in the center as shown,
and operate the right and left levers
simultaneously.
Moving the remote control lever(s)
further from approximately 35° will
increase throttle opening and boat
speed.
CAUTION
Avoid sharp and abrupt operation
of the remote control lever.
Operate it moderately. Operate
the remote control lever and raise
the engine speed after making
sure that the gear was shifted
securely.
REMOTE CONTROL
LEVER
(DUAL TYPE)
REMOTE CONTROL LEVERS
REMOTE
CONTROL
LEVER
FORWARD
NEUTRAL
FORWARD
NEUTRAL
REVERSE
(SINGLE TYPE)
Gear Shifting
(R3 type)
REVERSE
R3 type
36ZVTT00_EN.book 61 ページ ２０２１年１１月１９日 金曜日 午後３時２１分