TOHATSU BFT 150D - Page 65

63
OPERATION
2. Move the remote control lever from
NEUTRAL toward FORWARD
position.
R1 type:
Moving about 32° engages the
gear. Moving the remote control
lever further opens the throttle and
increases the engine speed.
R2, R3 types:
Moving about 35° engages the gear.
Moving the remote control lever
further opens the throttle and
increases the engine speed.
For the sake of fuel economy, open
the throttle about 80%.
• When cruising at full throttle, note
that the engine speed must be in the
range BFT150D: between 5,000
min
-1
(rpm) and 6,000 min
-1
(rpm).
• If you feel that the engine speed
jumped up when the hull jumped or
at ventilation, cruise the boat by
returning the throttle to the slow
speed side.
• See “Propeller Selection” (page 40)
for a relation between the propeller
and the engine speed.
For best performance, passengers and
equipment should be distributed
evenly to balance the boat.
CAUTION
Do not operate without the
engine cover. Exposed moving
parts could cause injury; water
may damage the engine.
(R1 type) (R2 type)
NEUTRAL
FORWARD
REVERSE
REMOTE
CONTROL
LEVER
(R3 type)
FORWARD
NEUTRAL
REVERSE
REVERSE
FORWARD
REMOTE
CONTROL
LEVER
FORWARD
NEUTRAL
FORWARD
FORWARD
36ZVTT00_EN.book 63 ページ ２０２１年１１月１９日 金曜日 午後３時２１分