PRE-OPERATING PREPARATIONS36
6
ENOM00039-1
If outboard motor encounters an abnor-
mal condition of fault, the warning buzzer
will emit a continuous beep or intermit-
tent short beeps. The warning lamp (LED)
will synchronize with the buzzer and
engine speed will be limited (engine will
not stop).
See next page for conditions which will
lead to an abnormal condition or fault.
ENOM00040-B
Location of warning buzzer and
lamp
Warning buzzer
RC model: Located inside the remote
control.
Tiller handle model (Optional Parts):
Located inside of the top cowl.
Warning lamp (LED)
RC model: Located in the tachometer.
Tiller handle model (Oil auto mixing type
only): Located on the bottom cowl.
1. Warning lamp
1. Pilot lamp
5. Warning system
1
ENOF00851-A
1
ENOF01957-0
To Next Page
Loading...
