TOHATSU M40D2 - Stopping the Engine

ENGINE OPERATION 49
7
1. Control lever
2. Mine switch key
ENOM00049-A
ENOW00868-1
Be careful not to remove engine stop switch
lanyard from engine accidentally while boat
is running. Sudden stop of engine can cause
loss of steering control, speed, possibly
leading the crew(s) and or objects on the
boat to be thrown forward due to inertial
force.
Tiller handle type
1. Turn the throttle grip to the slow
position.
1. Throttle grip
2. START position
3. Full closed
4. Full opened
2. Put the shift lever in the Neutral posi-
tion.
Run the engine for 2-3 minutes at
idling speed for cooling down if it has
been running at full speed.
3. Turn the main switch key to the OFF
position or push the stop switch. (Do
not forget to turn the key off).
1. ON
2. START
3. OFF
Side mount RC type
1. Put the control lever in the Neutral
position and run the engine for 2-3
minutes at idling speed for cooling
down if it has been running at full
speed.
1. Control lever
2. Mine switch key
6. Stopping the engine
WARNING
N
R
F
1
2
ENOF00881-1
1
4
3
2
ENOF01908-1
ENOF01958-0
3
1
2
N
R
F
1
2
ENOF00881-1