PRE-OPERATING PREPARATIONS 31
6
1. Air vent screw
2. Fuel tank cap
2. Open the fuel tank cap slowly.
3. Fill the fuel carefully not to overflow.
4. After filling the tank, close the fuel
tank cap.
ENOM01660-0
ENOW00022-A
The engine oil is drained for shipping from
the factory. Be sure to fill the engine to the
proper level before starting engine. (To
properly fill the engine with oil follow the
instructions, See page 65)
1. Genuine or recommended engine oil
2. Filler lid
3. Oil tank cap
ENOW0002A-A
Use of engine oils that do not meet these
requirements will result in reduced engine
life, and other engine problems.
ENOW00603-0
Do not mix different brands of oil. Mixing dif-
ferent brands of oil, or different types of oil
even if the brand is the same, may cause
gelling, resulting in possible filter screen
blockage. This could result in serious engine
damage because of impaired lubrication
performance.
Use a genuine two stroke engine oil or
ones recommended (TC-W3). Refer to
your Distributor.
Use of other two stroke engine oil is not
recommended.
3. Engine oil recommendation
CAUTION
1
2
ENOF00027-B
SAFE FILL
LEVEL
25 L
NIVEAU
MAXIMUM
ENOF00030-A
CAUTION
CAUTION
ENOF01963-0
1
3
2
To Next Page
Loading...
