EasyManuals Logo

TOHATSU M40D2 User Manual

TOHATSU M40D2
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #83 background imageLoading...
Page #83 background image
INSPECTION AND MAINTENANCE 83
10
ENOM00106-1
If you moor your boat in cold weather at
temperatures below 0°C (32°F), water
residue in water pump may freeze and
may damage the pump, impeller, etc. To
avoid, submerge the lower half of the
outboard motor into the water.
ENOM00107-A
ENOW00935-0
Striking the sea bottom or an underwater
object may severely damage the outboard
motor.
Follow the procedure below and consult
a dealer as soon as possible.
1. Stop the engine immediately.
2. Check the control system, gear case,
boat transom etc.
3. Return to the nearest harbor slowly
and carefully.
4. Consult a dealer check the outboard
motor before operation again.
ENOM00121-0
When operating the outboard motors in
reverse at more than the lowest speed,
be sure that all engines are running.
If any engine has stopped, be sure to tilt
the outboard motor up and keep its pro-
peller out of the water.
Otherwise, water could enter the engine
and cause damage to it.
6. Cold weather precautions
7. Striking underwater object
CAUTION
ENOF01145-0
8. Operation with multiple
outboard motors

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TOHATSU M40D2 and is the answer not in the manual?

TOHATSU M40D2 Specifications

General IconGeneral
BrandTOHATSU
ModelM40D2
CategoryOutboard Motor
LanguageEnglish

Related product manuals