ENGINE OPERATION42
7
ENOM01662-A
Tiller handle type
1. Be sure to install the stop switch lock
to the stop switch, and attach the
stop switch lanyard securely to the
operator or to the operator's PFD
(Personal Flotation Device.)
1. Stop switch lock
2. Stop switch
2. Set the shift lever in the Neutral posi-
tion.
1. Shift lever
2. Neutral
3. Set the throttle grip to START posi-
tion.
1. Throttle grip
2. START position
3. Full closed
4. Full opened
4. Pull the choke knob fully.
1. Choke knob
ENON00501-0
Note
Choke is not necessary when the engine is
warm. Set the throttle grip to “START”
position.
ENON00502-0
Note
If engine does not start with 4 or 5 times
starting operation, push the knob back and
restart.
ENOF01906-0
1
2
1
4
3
2
ENOF01908-1
1
ENOF01909-0
To Next Page
Loading...
