5
5-53
4st 60 2019
r
t
4st OIL
4st
OI
L
20. Install thermostat, new gasket, thermostat cover r and
exhaust cover t.
For installation procedure, refer to "Installation of
Cylinder Head".
19. Install oil filter and tighten it to specified torque by using oil
filter wrench.
Oil Filter Wrench :
P/N. 3AC-99090-0
Oil Filter :
18 N·m (13 lb·ft) [ 1.8 kgf·m ]
Apply thin coat of engine oil to O-ring before
installing oil filter.
Exhaust cover Bolt :
6 N·m (5 lb·ft) [ 0.6 kgf·m ]
21. Install cylinder head.
To Next Page
Loading...
Need help?
General
