2-11
■
(5) Examination data list
The examination data of the selected patient is listed here. Tap the
examination data to be viewed. For Corneal Map data, the corneal shape
analysis screen appears when the examination data is double-tapped. Also,
select the “Report List” tab on the upper right corner to recall the report list
and check the created report.
(6) “Image Settings” button
Enter settings for displaying an OCT cross section image. Enter settings on
the System Setup screen to change the default settings.
(7) “Report” button
Displays the report screen.
(8) Application button
Touching the button displays the corresponding analysis application screen.
(9) Switch examination data list and report list
Switch between the saved examination data list and report list.