3-1
■
3. OPERATION PROCEDURES
3.1 Safety precautions
3.1.1 Precautions for installing the instrument
■
Install the instrument in a location free of water or
chemicals. Any water or chemicals entering the
instrument may cause electric shock or failure.
■
Do not install the instrument in a location where
chemicals are stored or gases may occur. Spilt
chemicals or vapor may enter the instrument and
result in fire.
■
Be sure to transport the instrument with two or
more operators. In this case, do not hold the head,
chin rest, forehead pad, joystick, or cables.
These components are detachable and the
instrument may drop, resulting in injuries.
■
Install the instrument in a location not subject to
direct sunlight, high temperature and humidity, or
air containing dust, salt, and/or sulfur. Otherwise,
failure or malfunction may occur.
■
Install the instrument in a stable, level location
free of vibration or mechanical impact.
Otherwise, measurement cannot be conducted
correctly. Also, the instrument may topple over or
fall down, resulting in fire or a serious accident.
■
Install the instrument so that the user can use the
system under optimal conditions. Carefully
connect the devices so that the wiring is not
disconnected unintentionally during operation,
and does not hinder operation of the instrument.
To Next Page
Loading...
Need help?
General
