■
i-2
■
Do not place water or chemicals on the instrument.
chemicals entering the instrument may cause electric shock or failure.
■
This instrument is a diagnostic/measuring device specially designed
for ophthalmology. Never use the instrument for other purposes.
■
The terminal for connecting the instrument to external devices is not
isolated from the internal circuit. Inappropriate wiring may damage the
internal circuit. Contact Tomey or your local distributor b
the instrument connected to another device.
■
When operating this instrum
ent connected to other devices not
described in this document, only use devices that satisfy IEC60601-1 or
equivalent safety requirements or that conform to IEC60950 and whose
power source is insulated with the attached AC-Adapters, in order to
satisfy the safety requirements regarding medical equipment.
■
AC-
Adapters differ between the touch panel LCD monitor and the
external HDD. Connect in correct pairs to prevent failures.
To Next Page
Loading...
