13
Front Panel Display Descriptions
1. LCD display
2. USB communication / *Back light button
3. Power ON/OFF button
4. Frequency and record mode selection
5. Secondary display mode (D /Q//ESR, etc.)
6. Primary display mode (L/C/R/Z, etc.)/ auto
LCR selection
7. Rate/equivalent mode selection
8. Hold mode/ utility menu
9. Tolerance mode/ utility arrow key
10. Open/short clear/ utility arrow key
11. 5-terminal test sockets (direct measurement
on lead components or use of test fixture)
12. 3-terminal test jacks (for use of Banana plugs
—Crocodile clip Test Leads)
13. Standard mini USB port (for remote control)
14. 12VDC external power input (use with an
external power adapter)
*Backlight is not included in TH2822.
NOTE: Refer to the adapter
’
s label for input
parameters of it. Rated output parameters is 12VDC
，
150mA
，
4mm.
NOTE: Use with included power adapter only or
purchase the specified adapters from Tonghui. Use
To Next Page
Loading...
