39
Disable Auto LCR Mode
Long press the AUTO button again will disable auto
LCR mode. In addition, this mode will not continue
through changing the primary and secondary modes,
series/parallel equivalent mode and frequency mode.
“AUTO” indicator on LCD will disappear when auto
LCR mode is turned off.
Measurement Rate (RATE)
There are two selectable measurement rates in this
instrument: fast and slow. The rate of fast
measurement is about 4~5times/sec and slow
measurement is approximate 1.5 times/sec. The
stability of slow measurement is higher than fast
measurement.
The fast and slow rates can be directly switched by
pressing RATE button. “FAST” indicator will be
displayed on LCD at fast rate and “SLOW” indicator at
slow rate.
Series/parallel Equivalent Mode
For the presence of non-ideality and distributed
parameters of components, actual components are
usually equivalent to combined network of ideal
components. In general, there are two simple
To Next Page
Loading...
