95
Cleaning
B
efore cleaning this meter, make sure the power is
OFF and remove external AC adapter if one is used.
To avoid electrical shock or damaging the meter,
prevent water from getting inside the case. In the case
that water gets inside, remove the battery immediately
and do not operate the instrument immediately.
To clean the meter, wipe the dirty parts with a soft
cloth soaked with diluted neutral detergent. Avoid
having the instrument too wet to prevent the detergent
from penetrating into the inside components of the
meter, causing damages.
After cleaning, make sure the instrument is completely
dried before operating it again.
To Next Page
Loading...
