69
• Baudrate：9600
• Data bits： 8
• Parity: None
• Stop bits： 1
• Flow Control: None
Upon the installation of USB driver, if the default
assigned by serial port does not match to above
configuration, please modify it as the following
process:
Open Windows device manager→ Port→ Used Serial
Port→ Right Click → Property→ Port Setup
RMT Operation
In the case of communication, the RMT button is
used to change the running modes：
Change to Local Operation in Remote Control Mode;
Change to Auto Fetch state in Local Operation mode;
Disable the Auto Fetch function in Auto Fetch state.
NOTE: Auto Fetch state means to send testing result
automatically without needing the initiative inquiry of
PC.
To Next Page
Loading...
