Tonghui TH2822 - Page 19

18
7. D – Dissipation indicator
8. Q – Quality factor indicator
9.
– Secondary display
10.
– Beeper tone indicator for tolerance
mode
11. deg – Phase angle (θ) units indicator
12. Ω – ESR(ohm) units indicator
13. % - Percentage indicator (in tolerance mode)
14. kHz – Frequency units indicator
15. PAL – Parallel mode indicator
16. SER – Series mode indicator
17.
– Inductance units (L) indicator
18.
–Capacitance units (C) indicator
19. MkΩ – Resistance(R) /impedance units
indicator
20. RMT – Remote mode indicator
21.
– Primary display
22. ESR – Series mode indicator for secondary
parameters
23. DH – Data hold indicator
24. SLOW – measuring rate indicator
25. 2105% - Limits indicator in tolerance mode
26. FAST- Fast measuring rate indicator
27.
– Low battery/charging indicator
28. @OFF –Auto power-off indicator