32
Recording State
This is the default mode when enabling static
recording. In this mode, LCD will display “MAX AVG
MIN” indicator. In a relatively stable range of test data,
a beep tone will sound once a recording has been
stored.
NOTE: When the data fluctuation range is upwards of
1%, data record will dynamically be refreshed.
Maximum Display
Press REC button until the “MAX” indicator is shown
on display. This indicates that the value in the primary
display represents the recorded maximum value.
Minimum Display
Press REC button until the “MIN” indicator is shown
on display. This indicates that the value in the primary
display represents the recorded minimum value.
To Next Page
Loading...
