Tonghui TH2822 - Page 81

80
CALCulate:TOLerance:VALUe?
Description: Query the percentage value of
tolerance
Return: NR3 or ----- (exceeding data range)
CALCulate:TOLerance:RANGe < 1 | 5 | 10 |
20 >
Description: Set tolerance range as 1%,5%,10%
or 20% (20% not available for some models )
Example: CALCulate:TOLerance:RANGe 1
Set 1% tolerance range
CALCulate:TOLerance:RANGe?
Description: Query the tolerance range
Return: <BIN1, BIN2, BIN3, BIN4 or ---- >
“----” means unsetting range
CALCulate:RECording:STATe < ON | OFF >
Description: Enable or disable recording function
Example: CALCulate:RECording:STATe ON
CALCulate:RECording:STATe?
Description: Query the recording state
Return: <ON or OFF>
CALCulate:RECording:MAXimum?
Description: Query the maximum value of
recording function
Return: <NR3, NR3> ( primary and secondary
parameters, when data exceeds limits or
there is no data, what returns is“----”.)