@
ToolkitRC
2019
the corresponding battery. automatically configure
the relevant output voltage and current.
Configure the relevant output voltage and current
12.0V: The voltage output from the output main port
can be set to 5-30V.
10.0V: Maximum current limit output from the main
port. the range of 1-15A can be set.
Start: Start output. stop output button
0.0V 0.0A 0.0W: Current output current and power
of the main port.
33 ° C: current internal temperature of the device.
00:00：output time
CV CC: current working mode. CV: constant voltage
CC: constant current
===============================
Important:
1. Do not charge the normal battery when the
power output is turned on. Otherwise. the battery
may be damaged or the device may be damaged.
===============================
To Next Page
Loading...
