@
ToolkitRC
2019
power source (the input must be rechargeable
battery power)
SBUS value: The display mode of sBus when
measuring or outputting. can be set to pulse width
value (1000-2000). or original value (0-2047).
Backlight brightness: The brightness level of the
backlight of the display can be set to 1-10
Contrast: Display contrast of the display. which can
be set to (-10 to 10)
Buzzer: The tone of the buzzer can be set to off.
Energy saving tips: The sound and light are not
disconnected from the power supply during this
time.
Continuous operation: After charging and
discharging. whether to continue charging and
discharging after replacing the battery
Default setting: Restore all settings to their default
values.
To Next Page
Loading...
