@ToolkitRC 2024
2，Number of cells
Move the cursor to the position of “Battery Cells”, short
press [Scroll Wheel] to modify the number of battery
cells. The display is as follows:
Scroll the [Scroll Wheel] to adjust the value. When set to
[Auto], the charger will automatically identify the
number of strings of connected batteries based on the
voltage of the battery connected to the output port.
Press [Confirm] will take effect and go back to the
previous page.
===================================
Tips: 1, access to the battery over-discharge or
overcharge, may lead to the battery string
number identification error, need to manually set the
correct number of strings. 2, incorrectly set the number
of strings, you may not be able to charge the batteries,
or overcharging damage to the batteries, please be
To Next Page
