@ToolkitRC 2024
To end the charging and discharging work, select
[Channel 1 - Stop] to stop the work and return to the
main interface.
When charging is complete or charging error occurs.
A prompt box will pop up with a prompt sound.
Display content description:
24.0V: Input supply voltage.
14.8A: Input supply current.
20Wh: the cumulative power consumption of the input
power supply.
45°C: The internal temperature of the charger.
32.23V: the voltage of the main port of the first channel.
5.00A: the current of the main port of the first channel.
10:59: First channel working hours.
2000mAh: the cumulative capacity of the first channel.
1 4.200V: The first battery voltage
.......
4 4.200V: The fourth battery voltage (Red mark
means this battery is under balance management)
-.--V: No battery connected.
To Next Page
