Topcnc TC5510 - Pars Set (Parameters Settings); Sys Pars (System Parameters)

SvAs Prog OK Save as the program successfully
Save Prog OK Save the program successfully
3.4
3.4
3.4
3.4 Pars
Pars
Pars
Pars Set(Parameters
Set(Parameters
Set(Parameters
Set(Parameters settings)
settings)
settings)
settings)
In the main interface, press the left F4 key to enter the Pars Set(Parameters
settings) interface. In this interface, we can edit or modify the controller parameters.
Sys Pars System parameters
Sys SC System self-check
IO Set IO settings
Usr Mgmt User management
Sys
Sys
Sys
Sys Pars(System
Pars(System
Pars(System
Pars(System parameters):
parameters):
parameters):
parameters): the Control parameters and Speed parameters
can be edited or modified.
Sys
Sys
Sys
Sys SC(System
SC(System
SC(System
SC(System self-check):
self-check):
self-check):
self-check): the Actual input, Setting input, Actual output, Program
output state can be checked.
IO
IO
IO
IO Set(IO
Set(IO
Set(IO
Set(IO settings):
settings):
settings):
settings): the external input or output ports can be defined or modified,
and the factory values can be resumed.
Usr
Usr
Usr
Usr Mgmt(User
Mgmt(User
Mgmt(User
Mgmt(User management):
management):
management):
management): We must enter the Usr Mgmt(User management)
interface to edit or modify all the parameters. Input the password to login.
3.4.1
3.4.1
3.4.1
3.4.1 Sys
Sys
Sys
Sys Pars(System
Pars(System
Pars(System
Pars(System parameters)
parameters)
parameters)
parameters)
In the Pars Set (Parameters settings) interface, press the left F1 key to enter the
Sys Pars(System parameters) interface. In this interface, we can edit or modify the