10
MONITOR
MONITOR
MONITOR SCREEN
• When saved, S/R/L is inverted.
• When the measurement value turns white, the measurement is finished.
• When the measurement value is yellow, the measurement of a multi-focal lens is being per-
formed.
Optical center's off.
[OFF CENTER] is displayed
when the optical center is off
by 4D or more.
Blue: , measurement value,
S/R/L
[ALIGNMENT OK] appears
when the lens is ready for
measurement.
Green: , measurement
value, S/R/L
Place + in center [MARKING
OK] appears, and the lateral
line will extend, getting the
instrument ready for marking.
Orange: , measurement
value, S/R/L
The target indicates optical center position.
And it varies depending on the symbol used in the spherical equivalent power.
Be noted that the target motion is different from that of Topcon telescopic lensmeters.
For axis marking procedures, refer the instruction in Page 27.
Don't use target's position but the prism value.
Left-eye lens
Transpose
Axial angle (every 5°)
OFF CENTER
ERROR
ALIGNMENT OK
MARKING OK
HARD.C (HARD CONTACT)
SOFT.C (SOFT CONTACT)
PAD (LENS PROTECTION PAD)
Right-eye lens
(Inversion indicates
a storage status.)
PRT:AUTO PRINT
waiting status
:AUTO
MEMORY ON
status
R/L :AUTO R/L ON
status
AUTO
AUTO
AUTO
Step
To Next Page
Loading...
