8
COMPONENTS
COMPONENTS
COMPONENT NAMES
(1) Mode buttons Pressed to change the mode, and when pressed;
(2) TRANS button Used to change (+) to (–) and vice versa in displayed cylinder value.
(3) R/L button Used to designate R for right lens or L for left lens.
(4) CLEAR button Used to delete all data in memory.
(5) PRINT button Press to output data trough RS-232C.
Press to obtain a print out readings.
(6) MEMORY button Used to store the measurement data.
Press for 3 sec and longer to turn off the back light.
Axis marker lever
BRIGHT control dial
LCD
Lens retainer
Lens table
Lens support
MEMORY button
Power switch
IN
OUT
RS-232C
USB
(6)
PROG TMMENU EXIT
Returns to the initial state.
Pressed on to connect the spectral transmittance meter
(optional).
if a progressive lens is known, this begins the distance vision
measurement.
brings the Menu screen.
To Next Page
Loading...
