4
SAFETY PRECAUTIONS
Icons Prevention item Page
To avoid fire/electric shocks, connect the power plug to a 3P AC
outlet (with ground) and secure grounding.
15
To prevent electrical shock, turn off the power switch and discon-
nect power cable before replacing fuses.
Replace fuses with the same rating and type.
33
To avoid electric shocks, do not attempt disassembling, rebuilding
or repairing. For repairs, call your dealer.
—
To avoid fire/electric shocks, do not install the instrument in a place
where it may get wet.
—
If there is a malfunction or if the instrument produces smoke, imme-
diately turn OFF the POWER switch and unplug the power cable.
To a avoid a possible fire due to malfunction, call your dealer and
ask for repairs.
—
Icons Prevention item Page
To avoid injury by falling, do not install the instrument on a slope or
in an unstable place.
15
To avoid electric shocks, do not handle the power plug with wet
hands.
—
This instrument has been tested (with 100-240V) and found to com-
ply with IEC60601-1-2: 2001.
This instrument radiates radio frequency energy within standard
and may affect other devices in vicinity.
If you have found out by turning on/off the instrument that it affects
other devices, it is recommended to change the direction, keep a
proper distance against other devices or change the outlet.
If you have a question, consult with the selling agent.
—
WARNING
CAUTION
To Next Page
Loading...
Need help?
General
