13
MONITOR
MENU LIST
EXIT Returns to the initial screen without changing settings.
LENS NORMAL Measures a normal lens.
NORMAL (PAD) Measures a normal lens wearing the lens protection pad.
SOFT CONTACT Measures a soft contact lens.
HARD CONTACT Measures a hard contact lens.
DISPLAY HORIZONTAL LARGE Horizontally enlarges the SCA display.
VERTICAL LARGE Vertically enlarges the SCA display.
NORMAL Normal display
PROGRESSIVE OFF Auto progressive recognition mode OFF.
AUTO Auto progressive recognition mode ON.
PROGRESSIVE ONLY Always begins with the Progressive zone center search
mode of the progressive lens.
REVERSE Measures the diopter power with the concave side up.
FAR MEMORY ON Auto memory of distance vision measurement.
OFF Manual memory of distance vision measurement.
NEAR MEMORY ON Auto memory of near vision measurement
OFF Manual memory of near vision measurement
AUTO R/L R/L Measurement of framed lens: Auto R/L switching
S/R/L Measurement of single lens/framed lens: Auto R/L switching
OFF S/R/L switching
AUTO MEMORY ON Auto memory is ON when the lens optical axis is aligned.
S : OFF R/L : ON
OFF
Auto memory OFF at measurement of single lens. It is ON at
measurement of framed lens.
Auto memory OFF.
BEEP ON Buzzer sounds when a measured value is stored or a button
is pushed.
OFF Buzzer OFF
STEP 0.25 0.25-step measurement.
0.12 0.12-step measurement.
0.01 SERVICE 0.01-step measurement.
A:STEP 5 Rounds axial angle settings to 5°
1
PRISM NO DISPLAY No prism display.
X-Y Rectangular coordinate display
P-B Polar coordinate display
(mm)
mm display at
PD/OFF
To Next Page
Loading...
Need help?
General
