16
PREPARATION
4 Close the cover.
• Printer feed function : Press print button while pressing clear button.
• Do not install the instrument in a place which is exposed to direct sunlight, high
temperature, humidity or dust.
• Do not install the instrument at a place exposed to intense light or on a glossy
table.
• The instrument may not operate properly or "ERROR" may be displayed.
• Working enviroment
Indoor use Altitude up to 2,000m
Pollution degree II Temperature range: 5-40°C
Maximum relative humidity 80% for temperatures up to 31°C decreasing linearly
to 50% relative humidity at 40°C
• Use a power of AC100-240V/
±10% (50/60Hz)
• Use transient overvoltages typically present on the power.
• Do not install the equipment so that it is difficult to operate Power switch.
Button
Cover
Shaft
Align paper
with this line.
To Next Page
Loading...
