25
6. SETTINGS FOR THE TOTAL STATION
Tracking Meas.
This setting refers to angle display when performing Auto Tracking.
In the "Stop&Go" setting, the angle display is stable when the target stops during Auto Tracking.
The "Stop&Go" setting may help measurements in scintillation in some degree.
TURN (Accu. rotate)
This option allows the user to set a tolerance range for setting accuracy (after rotation to a
specified angle). For example, when this option is set to 30" and [TURN], [H.ANG], or [INV] is
pressed, the instrument will stop rotation within 30" of the specified rotation angle.
5. Press [Enter].
To Next Page
Loading...
