32
6. SETTINGS FOR THE TOTAL STATION
● When "Search" is set
"Motor"
setting
Softkey
When "Search" set in "A.T. Setting"
When "None" set in
"A.T. Setting"
"Srch method" is R.C.
"Srch method" is G.S.
(Global Search)
[SRCH] Performs Auto Pointing
[DIST] Performs Turning
operation then angle/
distance measurement
Performs Auto Pointing
then angle/distance
measurement
Performs angle and
distance measurement
[RC] Rotates directly in the direction of the Remote Controller then performs Auto
Pointing
[<-RC] Rotates in a counterclockwise direction (from the point of view of the Remote
Controller) then performs Auto Pointing
[RC->] Rotates in a clockwise direction (from the point of view of the Remote Controller)
then performs Auto Pointing
[RC Cont] Nullifies the current measurement position then continues Turning operation
[TRK On] Performs Turning
operation then Auto
Tracking
Performs Auto Pointing
then Auto Tracking
Performs Auto Tracking
*1
To Next Page
Loading...
