Topcon RC-5A - 360° Sliding Prism (ATP1 SII); RC-Handle Accessory; Protector (RP3) Accessory

42
7. BASIC OPERATION
5. Hold the Remote Controller horizontal and
press the SEARCH button .
● FAR Flashes.
6. Without moving the position of the Remote
Controller, rotate it 1.5 to 2 times in a
horizontal direction.
7. After rotating, continue to hold the Remote
Controller horizontal and press the SEARCH
button .
8. ● FAR turns Off.
9. Push and hold the POWER button on the
Remote Controller to switch OFF. ● POWER
turns Off and calibration is complete.
1m or above